Sanyo VPC-S1085 Manuel d'utilisateur télécharger pdf (Page 17)

EN-16

Initial Settings

Setting the Date and Time

The date/time needs to be set if and when:

 The camera is turned on for the first time.

 The camera is turned on after leaving the camera without the batteries for an

extended period of time.

When the date and time information is not displayed on the LCD monitor, follow these

steps to set the correct date and time.

1. Press the button, and set the camera

mode to [ ] or [ ]; or press the

button

2. Press the button.

3. Select [Setup] with the f button.

4. Select [Date/Time] with the c / d buttons, and

press the button.

5. Select the date format with the c / d buttons,

and press the button.

 Select the item’s field with the e / f buttons

and adjust the value for the date and time

with the c / d buttons.



The time is displayed in 24-hour format.



After confirming all settings are correct, press

the button

6. To exit from the [Setup] menu, press the

button.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 44 45

Pas de commentaire

Sanyo VPC-S1085 Manuel d'utilisateur Page 17